QTPL is a forerunner when it came to evolving and adapting to the wholesale market reforms. Since its inception it has grown by leaps and bounds. Currently it is one of the largest employment generating organisation in north east. QTPL is focused on creating the digital India movement in rural areas of north east and in that endevour has created a low cost branchless business correspondent through digital transaction/white label atm.White label ATM, which is based on DIGITAL TRANSACTION, is trying to give maximum number of facilities to the people. Because till date, in most of our rural areas, due to less availability of branches and BLUE LABEL ATM, people are suffering from many problems regarding monetary. Especially after the demonetization those who are in below poverty line they are facing problems because of not having cash. So WHITE LABEL ATM/miniatm is the solution of every problem. Through WHITE LABEL ATM/miniatm people will be able to get cash @ POS very easily. People need not to go 10 to 20 KM far from their areas to withdraw money, transfers and any kind of transactions because WHITE LABEL ATM will provide every needs of people and it is a complete solution of DIGITAL PAYMENT.

Emerging Digital Online Services

The company EDOS is a sister concern of QUANTONE TRADERS PVT. LTD. Which is headquartered in North East, ASSAM.This company basically deals in the electronic authentication of users. Its aim is to promote the growth of e-commerce and e-governance through a wide digital use.
The company EDOS has emerged to contribute a digitally and financially inclusive society and to promote rural entrepreneurship and building rural capacity and livelihood.
The motives of the company are summed up below

  • To expand digital payment infrastructure.
  • To engender social changes through a bottom up approach with key focus on the rural citizens by digitalization.
  • To bring small merchants on board the digital payment eco-system.
  • And benefits for the small merchants by the lower rentals and to promote digital transactions.

Our services under EDOS are as follows

1. What is DMT?

A-DMT /Direct Money Transfer/Domestic Money Transfer is a process wherein any person can send money to any bank account in India.

2. What are the things that I need to carry for sending money apart from cash?

A-Sender of the money needs to have mobile no. Receiver/beneficiary of the money needs to have valid bank account no

3. Can I use my account to transfer funds to other account?

A- No, Transaction type is only from cash to bank

4. How much time does it take to send money?

A-Sender & beneficiary registration process is simple & takes a minute of your time & authentication happens through OTP. Post registration it takes few seconds to transfer the funds, the transfer happens through IMPS/NEFT

5. What is the per transaction limit ?

A. 25000/-

6. What is the transaction limit per month ?

A. Without kyc 25000/-

B. With kyc upto 2lacs

7. What are the additional charges that customer needs to pay for services ?

A. Transaction Fee to the customer is 1.5% + Rs 5/- of the transaction amount with minimum Rs 20/-

8. What is the commission amount that I get per transfer ?

A. As per agreement

9. Do I need to maintain a prepaid balance for availing this service?

A. Yes , a prepaid balance needs to be maintained with EDOS.


This Company WTCFU basically deals in the sanitation and hygiene program of woman and child. Because at present days sanitation and hygiene are the key issues for woman and child, consistent with their need for privacy, dignity, safety and self respect.

Globally, about 2.4 billion people have inadequate access to sanitation facilities and one billion people practice open defecation. In India, about 300 million woman and girls have no choice but to defecate in the open.

Sanitation routines not only include defecation or urination but also anal cleansing after defecation, bathing and menstrual management.

So, with the full package of social support and privacy, the company WTCFU an initiative of "AAPNA BAZZAR" AAPKA PRAGATI KA SAATHI – aimed to give more beneficial services or ideas to woman and children by providing free health checkup as well as free distribution of sanitary napkins with the help of central and state Govt. in the rural areas, urban areas and semi urban areas. In most of the rural areas awareness on basic health and feminine hygiene is very low, with 75% woman lacking adequate knowledge on menstrual hygiene and care. Incidence of RTI was 70% more common among women with unhygienic sanitary practices cervical cancer is the other big thing that happens to woman due to unhygienic sanitary practices. It kills around 72,000 Women in India every year. Most of women of our country are using clothes also as a napkin during the menstrual time, which causes vaginal cancer as well as stomach pain.

So, to get relief from this pain, the company WTCFU has taken this initiative for the welfare of the girl child.

Because we take care for u........................

  • To expand digital payment infrastructure.
  • To engender social changes through a bottom up approach with key focus on the rural citizens by digitalization.
  • To bring small merchants on board the digital payment eco-system.
  • And benefits for the small merchants by the lower rentals and to promote digital transactions.
1. How easy is it for housewives to use GSD?
  • Installation and fitting same as regulator
  • Open/Close tap similar to regulator
  • Large dial for clear view of the gas level and shut off indication
  • No tools needed for installation
2. Does GSD serve as a regulator?

No. GSD serves as an Emergency Shut off device only.

3. Do you have trained manpower to install GSD?

Every Authorized Reseller/marketer/contract supplier will have well trained staff to install the GSD and troubleshoot the system.

4. Will GSD shut off the cylinder if milk / water boils over and extinguishes the flame?

No, since if it does so, one cannot light a stove at all.

5. What is the GST percentage for?

GST - 18 %

6. How does GSD detect the leak?

Based on the Bernoulli principle - As the speed of moving fluid or gas increases the pressure of the fluid or gas decreases. Conversely when there is a rupture speed of the gas decreases thereby pressure increases which triggers and moves the shut off element against O ring thereby shutting off further gas flow.

7. How accurate is the gauge on GSD?

The gauge merely works on pressure whereby it states the indicative quantum of gas in the cylinder and cannot accurately measure the quantum of gas. In other words it is an indicator and not a measuring device.

8. What are the materials used to make GSD?

Aluminium body, Brass nozzle and nylon/glass fiber on/off tap.

9. Does GSD work on commercial gas cylinder?

Yes, when used with a standard low pressure regulator. It cannot be used on commercial cylinders with unreduced pressure.

10. Does GSD work on cooking range?


11. Does GSD work on Gas geysers?


12. Does GSD work on automobile gas cylinders?


13. Does GSD work on pipeline gas?

No. It is not meant for pipeline gas supply from Mahanagar Gas, Reliance etc., It will work on out of the home cylinder systems.

14. Do you have a product for pipeline gas?


15. Does GSD detect a leak in the cylinder?

No. GSD detects leaks which happen after the gas has passed through the shut off element.

16. We have no problems till date with LP Gas then why should we buy GSD?

GSD is a kitchen safety appliance which can be likened to purchase of helmet to drive a two wheeler and purchase of stabilizer for home appliances. Consumers are incurring recurring costs in the form of Medical Insurance, Vehicle Insurance and Property insurance as a post incident remedy, whereas GSD helps prevent any accident in the kitchen through a onetime investment.

Also there is a savings of up to 25 %-30% as evidenced by testing of the product under standard conditions with results being tabulated at IIT, Madras. This means a consumer using on an average one Gas Cylinder a month recovers the cost of investment within a year’s time.

17. Why has it taken such a long period to introduce in India even though the product is used widely in the globe?

The regulatory process in India being methodical and stringent is a major deterrent. Marketing involves supstantial convincing of the customer and ground work. Also the high distribution and installation costs required for this product.

18. Where is GSD manufactured?

We buy the product from the Australian company who are getting it contract manufactured by a Taiwanese company.

19. What are the regulatory approvals obtained for GSD?

We have initiated the process of obtaining approval from the Office of Chief Controller of Explosives at Petroleum and Explosives Organisation (PESO), Nagpur. Upon receipt of the approval we hope to obtain the formal endorsement from Indian Oil Corporation. IOC has independently and successfully tested GSD at its LPG Equipment Research Centre (LERC) at Bangalore.

20. Is there explosives approval for GSD?

Earlier PESO, Nagpur vide its communication No.G.3(4)40/Misc/2007 dated 06/12/2007 informed that the product does not fall under the ambit of Gas Cylinder Rules 2004 hence no formal approval is required. But we have since initiated the process to obtain their formal approval to facilitate endorsement by IOC.

21. Is there a UL certification for GSD?

We have initiated the work to obtain UL approval. We have been allotted project reference number 10CA08342 dated 09th Feb 2010. We are hopeful of getting it since our Australian principal has already obtained the same earlier for their US product.

22. When do you propose to get the UL certification of GSD?

UL approval process normally takes 3 to 6 months’ time.

23. Is there a BIS certification for the product?

Presently BIS does not have a standard for certifying our product.

24. When do you propose to get the BIS certification of GSD?

Once BIS sets a standard we are ready to apply for the same.

25. Has GSD been endorsed by the oil companies?

Not yet. We have initiated the process but are unable to comment on the final outcome.

26. List the names of independent entities which have tested GSD?
  • LPG Equipment Research Centre (LERC) Bangalore with a report supmitted directly to Indian Oil Corporation (IOC), Mumbai
  • NATA Accredited Laboratory in Australia - Please see documentation page.
  • IIT, Madras - Please see documentation page.
27. What are the quality assurance and quality control measures adopted?
  • There is a five stage quality program.
  • Component testing during manufacture
  • Completed product testing at manufacturing site
  • Random sample testing by independent agency in Sydney
  • '100% in house testing of units'
  • Unique batch number for identification and tracking the warranties in the unlikely event of defective batches being identified
28. What does the batch number on GSD indicate?

Year of manufacture and product number.

29. What is the weight of GSD?

300 grams.

30. How does GSD help in LPG savings?

GSD reduces the flow of gas marginally without altering the pressure. In most cooking circumstances, especially when on a high flame part of the heat is lost to surrounding air and does not play a part in the cooking process. With GSD due to the reduced flow the gas usage is made more efficient whereby 100% of the heat is employed in the cooking. The reduced flow eliminates wastage of heat. This is akin to the practice of pressing the accelerator of a car gently according to the requirement of the vehicle speed instead of hitting the floor where petrol is released more than required.

31. Explain the Product Liability Insurance offered by COMPANY?

If company ships a product which is proven to be defective during the warranty period and this proven defect results in injury, company could be held liable to the injured party. Company will seek coverage for these claims under Polestar's Product Liability insurance policy written through The New India Assurance Company. This facility is available to products registered with company in the form of return of warranty cards duly filled for batch number, date of sales and reseller/dealer details. Warranty details can be sent to company by email for registration. Customers can soon make use of online warranty registration being contemplated.


The diagram shows in simplified form the path of gas through GSD R. Here's the sequence of normal gas flow

  • Gas enters the GSD R directly from the cylinder
  • Gas is channelled into a chamber, where it passes the shutoff element
  • Gas is then channelled up out of the chamber and past the gauge pin
  • Gas then exits

The various uses of GSDR all follow from this sequence. Importantly, the gauge pin is directly attached to the gauge, and acts as a pressure detector, which causes the gauge to show changes in gas pressure via movement in the needle.

How GSD Stops Major Leak?

The shutoff mechanism works on the Bernoulli principle. A sudden increase in gas changes the pressure around the shut of element, lifting it up and causing it to plug the exit to the chamber and stop the flow of gas completely.

The shutoff element will stay in this position until you push down on the gauge. The gauge pin then pushes the shutoff element back down into the chamber, so resetting the GSD R ready for normal operation.

The circumstances for a leak can be
  • Cracking of the hose due to regular wear and tear
  • Disconnection of the hose by accident
  • Weakening of the hose due to spillage of food / oil and consequential deterioration
  • Regulator failure delivers unreduced cylinder pressure
  • Hose is burnt off due to the ignition of small leaks
  • If the cylinder is accidentally knocked over on its side
  • Damages to gas tube caused by rodents
Circumstances where GSD R will NOT work
  • If the leak is negligible
  • If the flame at the burner of the stove extinguishes
  • If cylinder or stove is faulty
  • If leak is not large enough to create the required pressure differential

The GSDcan also be used to check for minor leaks in your gas system (from the GSD R to the stove) by carrying out the following steps:

  • We recommend use of LPG system after testing for leaks.
  • Minor leak test should be conducted under the guidance of a qualified gas technician.
  • When a leak is detected do not try to fix it yourself but have it rectified by a qualified gas technician.
  • DO NOT under any circumstances test for leaks with an open flame.

Turn off all appliances stove,GSD R and regulator. Turn on the tap of the GSD R and the regulator. Depress the GSDgauge a few times.

Turn off the tap on the GSD R while leaving the tap of the regulator on.

Now observe the needle in the gauge for 5 to 10 minutes. If there is no change in the position of the needle, then your LP gas system is fine and can be used as normal. A drop in the needle position indicates a minor leak in the system. Proceed to Step 4 to find the leak.

Using a brush, apply a soapy solution (little detergent dissolved in water) liberally to all parts of the fittings and hose of the system.

A bubble or bubbles will arise at the spot of the leak.

Smart education for smart student

The company SEFSS, Smart education for smart student is one more initiative towards the student. Students those who want to study but failed to do for their financial problem they will get the opportunity.
"Education is the most powerful weapon which you can use to change the world."
So, the goal of this company is to conduct a smart education by digitally. We are committed to take the advantage to help our students, to become world leaders in digital education system through –

  1. To give best modern Education to all students.
  2. To establish a smart education system for all.
  3. Free training services.
  4. Providing funds to unemployed.
  5. Developing digital resources.
  6. Assisting students to become digital nubs for their communities.
  7. Lastly working with digital Transaction

Card Machine

Card Machine, it is the transformation of blue Label ATM called White Label ATM which does not have such bank logo. That is why card machine is very easy to install in the name of any kind of bank.
The motive of the card Machine is to give 24 x 7 banking services to the citizen of India – as well as to the people of rural areas. Because card Machine is providing convenience to customer, people need not to visit bank branch every time.
And it is convenience to bank also because they don’t have to keep large staff/office. It reduces their cost of branch operation.
So, the card Machine is the easy way to do any kind of digital transaction sitting in any area of our country through an application. Using an application is also beneficiary for people because application can be upgraded whenever the new facilities emerged. So card machine can reduce the expenses of customers, save time also.